| 經卷 | 章 | 節 | 和合本聖經 | 台語聖經 | 台羅聖經 | 字典 | 瀏覽數 |
|---|---|---|---|---|---|---|---|
| 11列王紀上 | 7 | 27 |
他用銅製造十個盆座,每座長四肘,寬四肘,高三肘。 27 He also made ten movable stands of bronze; each was four cubits long, four wide and three high. 7:27 That is, about 6 feet (about 1.8 meters) long and wide and about 4 1/2 feet (about 1.3 meters) high
|
— 無音檔 —
他用銅製造十個盆座,每座長四肘,寬四肘,高三肘。
|
他(I) 用(Īng) 銅(Tâng) 製(Tsè) 造 十(Tsa̍p) 個(Ê) 盆(Phûn) 座(Tsō), 每 座(Tsō) 長(Tn̂g) 四(Sì) 肘(Tiú(丑)), 寬(Khuah闊) 四(Sì) 肘(Tiú(丑)), 高(Kuân懸) 三(Sann) 肘(Tiú(丑))。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 28 |
座的造法是這樣:四面都有心子,心子在邊子當中, 28 This is how the stands were made: They had side panels attached to uprights.
|
— 無音檔 —
座的造法是這樣:四面都有心子,心子在邊子當中,
|
座(Tsō) 的(ê) 造法(Tsō-huat) 是 這樣(án-ne): 四面(Sì-bīn) 都(Lóng) 有 心(Sim) 子(tsú/chí籽), 心(Sim) 子(tsú/chí籽) 在 邊(Pinn) 子(tsú/chí籽) 當中(Tang-tiong),
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 29 |
心子上有獅子和牛,並基路伯;邊上有小座,獅子和牛以下有垂下的瓔珞。 29 On the panels between the uprights were lions, bulls and cherubim--and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work.
|
— 無音檔 —
心子上有獅子和牛,並基路伯;邊上有小座,獅子和牛以下有垂下的瓔珞。
|
心(Sim) 子(tsú/chí籽) 上(siōng/tíng) 有 獅子(Sai) 和(Kap) 牛(Gû), 並 基路伯(Ki-lō͘-peng); 邊(Pinn) 上(siōng/tíng) 有 小(Siáu-hàn細漢) 座(Tsō), 獅子(Sai) 和(Kap) 牛(Gû) 以下(í-hā) 有 垂(Suê) 下(Ē) 的(ê) 瓔(Ing) 珞(Lo̍k)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 30 |
每盆座有四個銅輪和銅軸。小座的四角上在盆以下,有鑄成的盆架,其旁都有瓔珞。 30 Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side.
|
— 無音檔 —
每盆座有四個銅輪和銅軸。小座的四角上在盆以下,有鑄成的盆架,其旁都有瓔珞。
|
每 盆(Phûn) 座(Tsō) 有 四(Sì) 個(Ê) 銅(Tâng) 輪(Lián) 和(Kap) 銅(Tâng) 軸(Ti̍k)。 小(Siáu-hàn細漢) 座(Tsō) 的(ê) 四(Sì) 角(Kak) 上(siōng/tíng) 在 盆(Phûn) 以下(í-hā), 有 鑄(Tsù) 成(Tsiânn) 的(ê) 盆(Phûn) 架(Kè), 其(Kî) 旁(Pîng爿) 都(Lóng) 有 瓔(Ing) 珞(Lo̍k)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 31 |
小座高一肘,口是圓的,彷彿座的樣式,徑一肘半,在口上有雕工,心子是方的,不是圓的。 31 On the inside of the stand there was an opening that had a circular frame one cubit 7:31 That is, about 1 1/2 feet (about 0.5 meter) deep. This opening was round, and with its basework it measured a cubit and a half. 7:31 That is, about 2 1/4 feet (about 0.7 meter); also in verse 32 Around its opening there was engraving. The panels of the stands were square, not round.
|
— 無音檔 —
小座高一肘,口是圓的,彷彿座的樣式,徑一肘半,在口上有雕工,心子是方的,不是圓的。
|
小(Siáu-hàn細漢) 座(Tsō) 高(Kuân懸) 一(Tsi̍t) 肘(Tiú(丑)), 口 是 圓(Înn) 的(ê), 彷彿(ná-tshin-tshiūnn若親像) 座(Tsō) 的(ê) 樣式(iūⁿ-sek), 徑(Kìng) 一(Tsi̍t) 肘(Tiú(丑)) 半, 在 口 上(siōng/tíng) 有 雕(Tiau) 工(kang), 心(Sim) 子(tsú/chí籽) 是 方(hng) 的(ê), 不(bô) 是 圓(Înn) 的(ê)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 32 |
四個輪子在心子以下,輪軸與座相連,每輪高一肘半。 32 The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.
|
— 無音檔 —
四個輪子在心子以下,輪軸與座相連,每輪高一肘半。
|
四(Sì) 個(Ê) 輪(Lián) 子(tsú/chí籽) 在 心(Sim) 子(tsú/chí籽) 以下(í-hā), 輪(Lián) 軸(Ti̍k) 與(Kap佮) 座(Tsō) 相(Sio) 連(Liân), 每 輪(Lián) 高(Kuân懸) 一(Tsi̍t) 肘(Tiú(丑)) 半。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 33 |
輪的樣式如同車輪;軸、輞、輻、轂都是鑄的。 33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
|
— 無音檔 —
輪的樣式如同車輪;軸、輞、輻、轂都是鑄的。
|
輪(Lián) 的(ê) 樣式(iūⁿ-sek) 如(Jû) 同(tâng) 車(Tshia) 輪(Lián); 軸(Ti̍k)、 輞(tsan/koo)、 輻(Hok)、 轂(Kok) 都(Lóng) 是 鑄(Tsù) 的(ê)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 34 |
每座四角上都有盆架,是與座一同鑄成的。 34 Each stand had four handles, one on each corner, projecting from the stand.
|
— 無音檔 —
每座四角上都有盆架,是與座一同鑄成的。
|
每 座(Tsō) 四(Sì) 角(Kak) 上(siōng/tíng) 都(Lóng) 有 盆(Phûn) 架(Kè), 是 與(Kap佮) 座(Tsō) 一(Tsi̍t) 同(tâng) 鑄(Tsù) 成(Tsiânn) 的(ê)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 35 |
座上有圓架,高半肘;座上有撐子和心子,是與座一同鑄的。 35 At the top of the stand there was a circular band half a cubit 7:35 That is, about 3/4 foot (about 0.2 meter) deep. The supports and panels were attached to the top of the stand.
|
— 無音檔 —
座上有圓架,高半肘;座上有撐子和心子,是與座一同鑄的。
|
座(Tsō) 上(siōng/tíng) 有 圓(Înn) 架(Kè), 高(Kuân懸) 半 肘(Tiú(丑)); 座(Tsō) 上(siōng/tíng) 有 撐(the) 子(tsú/chí籽) 和(Kap) 心(Sim) 子(tsú/chí籽), 是 與(Kap佮) 座(Tsō) 一(Tsi̍t) 同(tâng) 鑄(Tsù) 的(ê)。
|
👁️ 1 🔊 0 |
|
| 11列王紀上 | 7 | 36 |
在撐子和心子上刻著基路伯、獅子,和棕樹,周圍有瓔珞。 36 He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around.
|
— 無音檔 —
在撐子和心子上刻著基路伯、獅子,和棕樹,周圍有瓔珞。
|
在 撐(the) 子(tsú/chí籽) 和(Kap) 心(Sim) 子(tsú/chí籽) 上(siōng/tíng) 刻(Khik) 著(Tio̍h對) 基路伯(Ki-lō͘-peng)、 獅子(Sai), 和(Kap) 棕(Tsang) 樹(Tshiū), 周(Tsiu) 圍(Uî) 有 瓔(Ing) 珞(Lo̍k)。
|
👁️ 1 🔊 0 |
提供免費台語聖經朗讀,包含國語與台語對照。
| 今天: | |
| 昨天: | |
| 總計: |
黃哲輝牧師